To the trade
Example: San Diego, CA or 90505 or 600 Ash St., San Diego
Terms & Conditions
TERMS AND CONDITIONS OF SALE
When used herein, “Buyer” shall mean the original purchaser of the carpet manufactured by the Manufacturer, and “Manufacturer” shall mean Fabrica®, a division of The Dixie Group, Inc. Unless expressly excluded herein, “Manufacturing Defect” shall mean that the product has a defect in workmanship, material, or construction that does not meet specifications within industry standards.
The terms and conditions set forth herein are the only ones upon which the Manufacture will accept orders. These terms supersede all prior oral or written understandings, assurances, and offers, and there are no understandings, agreements, representations, or warranties, express or implied, not specified herein. Buyer acknowledges and agrees that Buyer has full knowledge of these terms and conditions. Buyer has read and understands the provisions herein concerning the Manufacturer’s warranties, limitations on the Manufacturer’s liability, the Buyer’s obligations to subsequent purchasers, and indemnity. These terms and conditions shall become binding on both parties upon the first event to occur of the Buyer’s assent to these terms and conditions, or the Buyer’s acceptance of the first delivery of any of the Manufacturer’s goods, or upon commencement of manufacturing operations.
The Manufacturer warrants the manufacturing of its carpets to be free from obvious Manufacturing Defects for 90 days from the date of delivery to the original purchaser. The Manufacturer warrants the manufacturing of its carpets to be free from hidden Manufacturing Defects for two (2) years from the date of delivery to the original purchaser.
Disclaimer of Warranties.
The Manufacturer warrants solely the Manufacturing Defects set forth in paragraph three (3) above. EXCEPT AS EXPRESSLY STATED IN PARAGRAPH THREE (3) ABOVE, THE MANUFACTURER’S GOODS ARE SOLD WITHOUT WARRANTY. THE MANUFACTURER EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Claims for Manufacturing Defects or other complaints should be registered as soon as a problem is suspected. In no event will claims not registered within the time limit specified in paragraph three (3) above be considered. To register a complaint, notify either our Consumer Affairs Department, Phone (866) 873-2875, 3641 Hwy 411 North, Chatsworth, GA 30705 or the assigned territory manager. All pertinent claim information, such as Account Number, Invoice Number, Date, Reason for Claim, etc., is necessary to register a complaint. Claims for merchandise lost or damaged in transit are not Manufacturer’s responsibility when carpet is shipped FCA Manufacturers warehouse Incoterms 2000 (commonly called F.O.B. Mill). Title transfers to the Buyer when the shipment is accepted by the carrier, even if the freight is prepaid by the Manufacturer. It is the Buyer’s responsibility to inspect the merchandise for concealed shipping damage and to make claims immediately to the delivering carrier. It is the responsibility of the Buyer to inspect the merchandise upon receipt and prior to acceptance. Should a claim arise after installation, it is the responsibility of the Buyer to investigate the complaint prior to registering the claim. Claims will not be considered for pile crush, shading, pooling, watermarking, and, unless otherwise stipulated, soiling, stains, fuzzing, shedding, or matting. These conditions are not considered Manufacturing Defects. Slight color variation from one dye lot to another is normal and is not considered a Manufacturing Defect or a basis for a claim. Once the carpet has been cut and installed, claims for incorrect color or Manufacturing Defects that are obvious or should have been discovered upon inspection will not be considered. Slight imperfections are purposely manufactured with certain textures and have been proven not to affect the wear of the carpet; therefore, these characteristics are not considered Manufacturing Defects. Any treatment of the carpet with anti-stats, soil retardants, pesticides, plastic sheeting, etc. is done at the user's risk and such application, without our written approval, will void any subsequent claim. Claims for labor, handling, storage, installation, etc. will not be considered. Claims arising from improper installation, improper maintenance or cleaning, excessive or abusive use will not be considered. Claims will not be considered on merchandise sold as mill trials, seconds, remnants, mill ends, drops, or irregulars.
Limitation of Liability.
The Manufacturer’s sole liability, and the exclusive remedy against the Manufacturer, is limited to the repair or replacement of any materials evidencing Manufacturing Defects. In no event shall the Manufacturer be responsible for any incidental or consequential damages, including costs of installation or inspection, nor for any claims of damages for bodily injury or property damage. In no event shall the Manufacturer’s liability exceed the original purchase price of the carpeting in the area or room where such Manufacturing Defect in materials or workmanship is determined to exist. Buyer shall not have right of offset with regard to purchases made by Manufacturer.
In the event the Buyer sells or provides the Manufacturer’s goods to any third-party, the Buyer represents, warrants, and agrees that the Buyer shall comply with all applicable federal, state, and local laws, including, without limitation, consumer protection laws, applicable to Buyer’s transaction with such third-party involving the Manufacturer’s goods. In addition, the Buyer represents, warrants, and agrees that the Buyer shall disclose to such third-party, these terms and conditions, including, without limitation, the Manufacturer’s limited warranties, the Manufacturer’s disclaimer of warranties, the Manufacturer’s limitation of liability, and claims the Manufacture will not consider.
In the event a third-party, with whom the Buyer has entered into a transaction involving the sale or provision of the Manufacturer’s goods, asserts a claim against the Manufacturer as a result of the Buyer’s failure to comply with any applicable federal, state, or local law, including, without limitation, any consumer protection law, applicable to the Buyer’s transaction with such third-party involving the Manufacturer’s goods, then the Buyer shall defend, indemnify, and hold the Manufacturer harmless from such claim. In the event a third-party, with whom the Buyer has entered into a transaction involving the sale or provision of the Manufacturer’s goods, asserts a claim for breach of an implied warranty or a warranty or claim expressly disclaimed herein and the Manufacturer is found liable for such claim because the third-party was not made aware prior to the transaction of the Manufacturer’s disclaimer of any such warranty, express or implied, then the Buyer shall indemnify the Manufacturer.
Buyer hereby consents that if legal action is undertaken by the Manufacturer, Dalton, GA, USA, is the proper place for venue of said action, and by purchasing our goods, Buyer voluntarily submits to jurisdiction in Dalton, GA, USA. If legal action is necessary to enforce the terms of this agreement, the court shall award the prevailing party its reasonable attorney's fees, in addition to any other relief to which that party may be entitled. Manufacturer shall have the right, at its sole discretion, to offset against any amounts, and withhold from any payment which it may owe to Buyer, pursuant to any invoice, purchase order, agreement, sale, or transaction for any claims, rebates, amounts, or other liabilities it may have arising pursuant to any invoice, purchase order, agreement, sale, or transaction.
The Manufacturer reserves the right to change material when such changes do not adversely affect the wearability or other performance characteristics of the carpet.
The Manufacturer recommends the use of a high-density, low-profile padding in all installations. When using urethane padding, a minimum density of 6 pounds per cubic foot and a maximum thickness of 7/16" is recommended. Installing Manufacturer’s products without the use of a padding that conforms to the above description and/or specifications may void Manufacturer's warranties.
Cut orders are not subject to cancellation. Will-Call orders will not be held for more than 10 working days.
All orders are subject to approval by our Credit Department, or its agent. These conditions may include deposits, pre-payments or other special conditions stipulated and solely in our discretion. A finance charge of 1 1/2% per month or the maximum rate allowed by law, whichever is less, may be charged on each payment received after due date. A non-refundable fee will be charged on each check returned due to insufficient funds.
are approximate and not guaranteed. The Manufacturer shall not be liable for any delay in or inability to complete delivery because of any of the following causes: Act of God; suspension or requisition of any kind; strikes or other stoppages of labor or shortage in the supply thereof; inability to obtain fuel, material or parts; fire, casualties or accidents; failure of shipping facilities; riots; or any cause, whether the same or different character, or any other condition beyond the seller's control. Further, the Manufacturer reserves the right to backorder goods and will process and ship backordered goods as soon as possible. The Manufacturer is not responsible for consequential or other losses or expenses related to the date or time of delivery. The Buyer bears the entire risk of late delivery.
Merchandise may only be returned with a Return Authorization. To insure proper credit, the packing slip copy of the Return Authorization must accompany the return merchandise. Credit will be determined by the actual yardage received subject to examination and acceptance.
Continuing guaranty under the Textile Fiber Products Identification Act filed with the Federal Trade Commission
TERMS AND CONDITIONS OF WEBSITE USAGE
All content included on this site, such as text, graphics, logos, button icons, image, audio clips, digital downloads, data compilations, and software, except where explicitly noted, is the property of Fabrica® and The Dixie Group and are protected by United States and international copyright laws.
All software used on this site is the property of Fabrica®, The Dixie Group and or its software suppliers and protected by United States and international copyright laws.
Your use of Fabrica® is at your own risk. Neither Fabrica®, The Dixie Group or any other party involved in creating, producing or delivering the site is liable for any direct, incidental, consequential, indirect, or punitive damages of any kind arising out of your access to, or use of, the site. Masland Contract also assumes no responsibility, and shall not be liable for, any damages to, or viruses that may infect, your computer equipment or other property on account of your access to, use of, or browsing the site or your downloading of materials, data, text, images, video or audio from the site.
You agree to indemnify, defend and hold harmless Fabrica®, The Dixie Group, its affiliates, officers, directors, employees, consultants and agents from any and all third party claims, liability, damages and/or costs (including, but not limited to, attorney fees) arising from your use of our services, your violation of our Terms of Services or your infringement, or infringement by any other user of your account, of any intellectual property or other right of any person or entity. The Terms of Service will inure to the benefit of Fabrica® successors, assigns, and licensees.
Fabrica carpet and rugs are recognized for our singular beauty and exceptional quality. Using superior materials, state of the art technology, and highly skilled craftsmen, Fabrica creates carpet and area rugs that offer "quality without compromise".
The Dixie Group
Terms & Conditions
To the Trade
Copyright ® 2011 Fabrica - All rights reserved